TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 402 of 1072
TM 9-2350-247-20-2 REPLACE DRIVE SHAFT LUBRICATION HOSE, FITTINGS, AND BEARINGS (M548A1) — Continued 0237 00 INSTALLATION 1. If front bearing (14) or rear bearing (11) was removed, install bearing (11) or (14) and secure with two nuts (13) and screws (12). 2. Put a thin coat of sealing compound on threads of elbow (8) and elbow (10), grease two fittings (12), nipple (7), nipple (9), adapter (16), adapter (17), and adapter (1). 3. Install elbow (10) in rear bearing (11). 4. Install nipple (9), elbow (8), nipple (7), and elbow (6) on elbow (10). 5. Connect hose (5) to elbow (6). 6. Secure hose (5) to four weld nuts with four clamps (4), new lock washers (3), and screws (2). 7. Install adapter (1) in block and connect hose (5) to adapter. 0237 00-4