TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 282 of 1072
TM 9-2350-247-20-2 REPLACE EXHAUST PIPES (M548A1) — Continued 0209 00 4. Place exterior exhaust pipe (8) and new gasket (9) on power plant bulkhead. Secure with 6 screws (10), new lock nuts (11), and 12 washers (12). 5. Turn MASTER SWITCH ON (see your -10). 6. Start engine (see your -10). Check for proper installation of exhaust pipes. 7. Stop engine (see your -10). 8. Install top access cover and exhaust grille (WP 0390 00). 9. Install exterior exhaust pipe extension (13) on exterior exhaust pipe (8). Secure with two clamps (14). FOLLOW-THROUGH STEPS 1. Install engine exhaust pipe guard (WP 0208 00). Install power plant rear access door (see your -10). END OF TASK 0209 00-4