TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 277 of 1072
TM 9-2350-247-20-2 REPLACE ENGINE EXHAUST PIPE GUARD (M548A1) 0208 00 THIS WORK PACKAGE COVERS: Removal (page 0208 00-1). Installation (page 0208 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Lock nut (12) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) REMOVAL 1. Loosen eight screws (1). 2. Remove 8 screws (2), lock nuts (3), 16 washers (4), and slide guard (5) from exhaust pipe (6). Discard lock nuts. 3. Remove four brackets (7) from four bracket clamps (8) by removing eight screws (1) and washers (9). NOTE Mark position of bracket clamps on exhaust stack before removing for later installation. 4. Remove four bracket clamps (8) from exhaust pipe (6) by removing four screws (10), lock nuts (11), and eight washers (12). Discard lock nuts. 0208 00-1