TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 274 of 1072
TM 9-2350-247-20-2 REPLACE EXHAUST MUFFLER (M548A1) — Continued 0206 00 INSTALLATION 1. Place muffler (3) on power plant compartment bulkhead. Secure with four screws (4), eight washers (5), and four new lock nuts (6). Tighten screws to 240-300 lb-in (27-34 N•m) torque. 2. Install interior exhaust pipe (2) on muffler (3). Secure with clamp (1). Tighten clamp to 200-220 lb-in (23-25 N•m) torque. FOLLOW-THROUGH STEPS 1. Turn MASTER SWITCH ON (see your -10). 2. Start engine (see your -10). 3. Check for proper installation of muffler. 4. Stop engine (see your -10). 5. Install top access cover (WP 0390 00). 6. Install power plant rear access door (see your -10). END OF TASK 0206 00-2