TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 269 of 1072
TM 9-2350-247-20-2 REPLACE FUEL CUTOFF CONTROL CABLE ASSEMBLY (M548A3) — Continued 0205 00 ADJUSTMENT 1. Loosen two setscrews (1) on two retainer collars (2) that secure fuel cutoff control cable assembly (3) to pin (4) on engine governor fuel cutoff lever (5). 2. (H) Pull fuel cutoff control cable assembly (3) to full OUT position. 3. Move engine governor fuel cutoff lever (5) to the full OFF position. 4. Position two retainer collars (2) against pin (4) and secure with two setscrews (1). FOLLOW-THROUGH STEPS 1. Install forward driver’s side battery (WP 0194 00). 2. Connect both battery negative leads (WP 0292 00). 3. Start engine and check the fuel cutoff control assembly for complete engine stop when applied (see your -10). 4. Install driver’s left floor plate (WP 0392 00) 5. Lower center seat (see your -10). END OF TASK 0205 00-5/6 blank