TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 267 of 1072
TM 9-2350-247-20-2 REPLACE FUEL CUTOFF CONTROL CABLE ASSEMBLY (M548A3) — Continued 0205 00 INSTALLATION 1. Install pin (1) on engine governor fuel cutoff lever (2). Secure with washer (3) and new cotter pin (4). 2. Install grommet (5) in bulkhead, if removed. NOTE When installing fuel cutoff control cable assembly, hold securing nut and washer behind mounting hole in instrument panel and insert fuel cutoff control cable assembly through hole, washer and nut at same time. 3. Install fuel cutoff control cable assembly (6) in instrument panel mounting hole. Secure with washer (7) and nut (8). 4. Route fuel cutoff control cable assembly (6) under the floor through battery compartment, through grommet (5). 0205 00-3