TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 265 of 1072
TM 9-2350-247-20-2 REPLACE FUEL CUTOFF CONTROL CABLE ASSEMBLY (M548A3) 0205 00 THIS WORK PACKAGE COVERS: Removal (page 0205 00-1). Cleaning (page 0205 00-2). Installation (page 0205 00-3). Adjustment (page 0205 00-5). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Cotter pin Lock washer (4) P e r s o n n e l R e q u i r e d Unit Mechanic Helper (H) R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Both battery negative leads disconnected (WP 0292 00) Center seat raised (see your -10) Driver’s left floor plate removed (WP 0395 00) Forward battery under driver’s seat removed (WP 0293 00) REMOVAL 1. Loosen two setscrews (1) in two retainer collars (2). 2. Remove nut (3) and screw (4) from clamp (5). 3. Remove fuel cutoff control cable assembly (6) from clamp (5). 4. Remove fuel cutoff control cable assembly (6) and collars (2) from pin (7). 5. Remove four screws (8), lock washers (9), and clamps (10) securing fuel cutoff control cable assembly (6) to carrier. Discard lock washers. 0205 00-1