TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 238 of 1072
TM 9-2350-247-20-2 ADJUST THROTTLE PEDAL TO FULL THROTTLE AND IDLE POSITIONS (M548A1) — Continued 0199 00 NOTE Adjustment is needed only after disassembly and assembly. 4. Adjust detent plunger as follows: a. Loosen two jam nuts (9) securing two detent adjusting screws (10). b. Turn two detent adjusting screws (10) right to increase pressure or left to decrease pressure. A force of 35 to 40 lb (16 to 18 kg) is needed to depress detent plunger (11). c. Secure two jam nuts (9) on two detent adjusting screws (10). FOLLOW-THROUGH STEPS 1. Start engine (see your -10). 2. Check throttle pedal linkage for proper operation. If it fails to work properly, readjust. 3. Stop engine (see your -10). 4. Lower left center seat floor plate (WP 0394 00). 5. Lower center seat (see your -10). END OF TASK 0199 00-6