TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 237 of 1072
TM 9-2350-247-20-2 ADJUST THROTTLE PEDAL TO FULL THROTTLE AND IDLE POSITIONS (M548A1) — Continued 0199 00 NOTE Toe stop screw (2) may be mounted on hull or on throttle pedal. Adjust screw the same way in either location. 3. Adjust toe stop screw as follows: a. Remove jam nut (1) and toe stop screw (2) from throttle control link (3) and cross shaft bellcrank (4). b. Press throttle pedal (5) until transmission throttle arm (6) is in full throttle position. Loosen jam nut (7) and adjust stop screw (8) to 1/16 in (2 mm) gap between toe stop screw (8) and stop. c. Install throttle control link (3) on cross shaft bellcrank (4). Secure with toe stop screw (2) and jam nut (1). 0199 00-5