TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 211 of 1072
TM 9-2350-247-20-2 REPLACE FUEL CUTOFF HAND CONTROL (M548A1) — Continued 0194 00 INSTALLATION 1. Insert fuel cutoff control cable (1) in instrument panel (2) through washer (3) and nut (4). Secure nut and washer to hold control cable in place on instrument panel. 2. Insert fuel cutoff control cable (1) through grommet (5) and adapter (6). 3. Secure fuel cutoff control cable (1) to adapter (6) with clamp (7), two screws (8), and new lock nuts (9). 4. Install adjustable strap (10) to secure fuel cutoff control cable (1). 5. Install link pin (11) in engine stop lever (12). Secure with washer (13) and new cotter pin (14). 6. Install fuel cutoff control cable (1) through retainer collars (15) and link pin (11). Secure control cable in collars with two setscrews (16). 7. Install nine clamps (17) on fuel cutoff control cable (1). Secure clamps to weld nuts (18) with nine new lock washers (19) and screws (20). 8. Adjust fuel cutoff hand control (WP 0195 00). 0194 00-3