TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 205 of 1072
TM 9-2350-247-20-2 REPLACE HAND THROTTLE CONTROL — Continued 0192 00 INSTALLATION 1. Place throttle control adapter (1) on bulkhead. Secure with adapter washer (2) and adapter nut (3). 2. Insert hand throttle control cable (4) in instrument panel, through washer (5) and nut (6). Secure nut and washer to hold control cable in place. 3. Insert hand throttle control cable (4) through two grommets (7), adapter nut (3), adapter washer (2), bulkhead, and throttle control adapter (1). 4. Secure hand throttle control cable (4) to throttle control adapter (1) with clamp (8), two screws (9), and two new lock nuts (10). 5. Install link pin (11) and washer (12) on accelerator pedal (13). Secure with new cotter pin (14). 6. Install hand throttle control cable (4) in link pin (11) and retainer collar (15). Secure throttle control cable to retainer collar with setscrew (16). 7. Install three clamps (17) on hand throttle control cable (4). 8. Install three clamps (17) on hull nuts (18) with three new lock washers (19) and screws (20). 0192 00-3