Sign up to sell your inventory with NSN Lookup

TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download

Page 184 of 1072

TM 9-2350-247-20-2 REPLACE AIR BOX HEATER IGNITION COIL, AIR PUMP, AND CHECK VALVE (M548A3) — Continued 0185 00 INSTALLATION 1. Install check valve (1) by inserting valve in the same position as removed and pushing the outlet hose (2) and inlet hose (3) on valve connectors. 2. Place two leads (4) on two terminals on air pump (5) and secure with two washers (6) and nuts (7). 3. Connect air hose (8) and adapter (9) to air pump (5). 4. Install air pump (5) and coil (10) on mounting bracket (11). Secure with clamp (12), washer (13), and screw (14). 5. Connect ignition cable (15) and connector (16) to coil (10). FOLLOW-THROUGH STEPS 1. Install power plant rear access panel (see your -10). 2. Connect both battery negative leads (WP 0292 00). 3. Lower center seat (see your -10). END OF TASK 0185 00-4