TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download

Page 175 of 1072

TM 9-2350-247-20-2 REPLACE AIR BOX HEATER HARNESS AND IGNITER CABLE (M548A1) 0182 00 THIS WORK PACKAGE COVERS: Removal (page 0182 00-1). Installation (page 0182 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Battery negative lead(s) disconnected (WP 0292 00) Center seat raised (see your -10) REMOVAL 1. Remove two nuts (1) and washers (2) that secure two leads (3) on air pump (4). Remove leads. 2. Disconnect wiring harness (5) from ignition coil (6) and solenoid valve (7). 3. Remove screw (8), washer (9), and three leads (10) from air box heater (11). 4. Disconnect igniter cable (12) from ignition coil (6) and air box heater (11). 0182 00-1