TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 173 of 1072
TM 9-2350-247-20-2 REPLACE AIR BOX HEATER HOSES, TUBES, AND FITTINGS (M548A3) — Continued 0181 00 INSTALLATION 1. Install new fittings if needed. 2. Install hose (1) on check valve (2) and air pump (3). 3. Connect heater hose (4) on check valve (2) and elbow (5). 4. Place clamp (6) on heater hose (4). Install hose and clamp to engine with screw (7) and washer (8). 5. Wrap electric leads and heater hose (4) with spiral tubing (9) in two places. 6. Connect fuel hose (10) to elbow (11). 7. Connect fuel hose (10) to fuel line tee (12). 8. Install two clamps (13) on hose (10) with two screws (14) and washers (15). FOLLOW-THROUGH STEPS 1. Install power plant rear access panel (see your -10). 2. Install fuel filters (WP 0178 00). 3. Connect both battery negative leads (WP 0292 00). 4. Lower center seat (see your -10). END OF TASK 0181 00-3/4 blank