TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 167 of 1072
TM 9-2350-247-20-2 REPLACE AIR BOX HEATER HOSES, TUBES, AND FITTINGS (M548A1) 0180 00 THIS WORK PACKAGE COVERS: Removal (page 0180 00-1). Installation (page 0180 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Sealing compound (WP 0542 00, Item 37) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Battery negative lead disconnected (WP 0292 00) Power plant rear access cover/door removed (see your -10) Center seat raised (see your -10) REMOVAL NOTE Remove tubes and hoses with clamps attached. Attach clamps to replacement hoses and tubes. 1. Remove hose (1) from fuel tee (2). 2. Remove two screws (3), washers (4), and clamps (5) that secure hose (1) to engine. 3. Disconnect hose (1) from solenoid valve elbow (6). Remove elbow (6) and adapter (7) from solenoid valve (8). 4. Remove fuel tube (9) from elbow (10) and elbow (11). Remove elbow (10) from solenoid valve (8) and elbow (11) from air box heater (12). 0180 00-1