TM-9-2350-247-20-1 Unit Maintenance Manual Volume 1 M548A1 M548A3 Tracked Cargo Carrier Download
Page 805 of 870
TM 9-2350-247-20-1 REPLACE ENGINE OIL FILTER ASSEMBLY (M548A3) — Continued 0146 00 INSTALLATION 1. Apply sealing compound primer and a thin even coat of sealing compound to cleaned external threads of elbow (1) and elbow (2) before installing. 2. Install oil filter assembly (3) on bracket (4) with four screws (5), new lock nuts (6), and eight washers (7). 3. Install bushing (8) and AOAP sampling valve (9) on oil filter assembly (3). 4. Install elbow (1) and elbow (2) on oil filter assembly (3). 5. Connect oil inlet hose (10) to elbow (1). 6. Connect oil outlet hose (11) on elbow (2). 7. Start engine (see your -10). Check oil filter assembly (3) for leaks. 8. Stop engine (see your -10). Wait about 20 minutes for oil to drain back to pan. Then check oil level. Add oil if needed (WP 0128 00). FOLLOW-THROUGH STEPS 1. Connect both battery negative leads (WP 0292 00). 2. Lower center seat (see your -10) END OF TASK 0146 00-3/4 blank