TM-9-2350-247-20-1 Unit Maintenance Manual Volume 1 M548A1 M548A3 Tracked Cargo Carrier Download
Page 755 of 870
TM 9-2350-247-20-1 BLOCK POWER PLANT (M548A1) — Continued 0132 00 4. Stack a 4 x 6 x 10 inch (10 x 15 x 25 cm) block (1), a 2 x 4 x 10 inch (5 x 10 x 25 cm) block (2), and a 1 x 4 x 10 inch (3 x 10 x 25 cm) block (3) under transmission side of transfer gearcase. Blocks should be 8 inches (20 cm) high. 5. Stack a 4 x 6 x 18 inch (10 x 15 x 46 cm) block (4) and a 2 x 4 x 18 inch (5 x 10 x 46 cm) block (5) under rear of engine. Blocks should be about 7 inches (16 cm) high. 6. Lower power plant slowly down onto blocks. Check that power plant is firmly supported by the blocks. 7. Cover air inlet housing (6). Use wiping rag. FOLLOW-THROUGH STEPS 1. Install power plant in carrier (WP 0130 00). END OF TASK 0132 00-3/4 blank