TM-9-2350-247-20-1 Unit Maintenance Manual Volume 1 M548A1 M548A3 Tracked Cargo Carrier Download
Page 727 of 870
TM 9-2350-247-20-1 REMOVE/INSTALL POWER PLANT (M548A1) — Continued 0130 00 NOTE Install mounting clamps so nuts are on inboard and forward sides of mounts. 2. Install transfer gearcase mounting clamps. a. Install mounting clamp (2) to secure right transfer gearcase mount (3) to hull. b. Install mounting clamp (4) to secure left transfer gearcase mount (5) to hull. 3. Install two screws (6) with two new washers (7) in front engine mount (8). Tighten screws finger tight. 4. (H) Lower beam type sling (1) and detach from power plant. 5. Tighten two screws (6) securing front engine mount (8) to hull to 120-130 lb-ft (163-176 N•m) torque. 0130 00-15