TM-9-2350-247-20-1 Unit Maintenance Manual Volume 1 M548A1 M548A3 Tracked Cargo Carrier Download
Page 592 of 870
TM 9-2350-247-20-1 SERVICE UPON RECEIPT OF MATERIEL — Continued 0127 00 M548A1 AND M548A3 DEPROCESSING PROCEDURES NOTE The shipping closure and attaching hardware are reusable items. Do not damage. Keep attaching hardware with closure. Refer to your supervisor for disposition of these items. One access panel is installed on each side of cab. 1. Remove shipping closure (1). a. Remove six lag bolts (2), washers (3), and two side access panels (4) from two cab doors (5). Open cab doors. b. Remove two nuts (6), four washers (7), two washers (8), screws (9), and front of shipping closure (1) from two windshield mounting holes (10). c. Remove two nuts (11), washers (12), washers (13), and rear of shipping closure (1) from two studs (14). Lift shipping closure from carrier. d. Before storage of shipping closure (1), install two side access panels on shipping closure with six washers (3) and lag bolts (2). 2. Remove equipment packages from driver’s cab. Packages contain windshield wiper blades and arms with attaching nuts, exhaust pipe, and two hooks and pintle. 0127 00-2 Change 1