TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 591 of 640
TM 9-2350-247-10 COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS 0081 00 INTRODUCTION SCOPE This work package lists components of end item and basic issue items for the M548A1 and M548A3 carriers. This work package is to help you inventory items required for safe and efficient operation. GENERAL This Components of End Item List is divided into the following sections: (1) Components of End Item. This listing is for informational purposes only, and is not authority to requisition replacements. These items are part of the end item, but are removed and separately packaged for transportation or shipment. As part of the end item, these items must be with the end item whenever it is issued or transferred between property accounts. Illustrations will help you identify the items. (2) Basic Issue Items. These are the minimum essential items required to place the M548A1 and M548A3 carriers in operation and to perform emergency repairs. Although shipped separately packed, they must accompany the carrier during operation and whenever it is transferred between accountable officers. The illustrations will assist you with hard-to-identify items. This manual is your authority to requisition replacement BII, based on TOE/MTOE authorization of the end item. EXPLANATION OF COLUMNS Column (1) - Illustration Number (Illus. Number). Gives you the number of the item illustrated. Column (2) - National Stock Number (NSN). Identifies the stock number of the item to be used for requisitioning purposes. Column (3) - Description, CAGEC, and Part Number. Identifies the federal item name (in all capital letters) followed by a minimum description when needed. The stowage location of COEI and BII is also included in this column. The last line below the description is the CAGEC (Commercial and Government Entity Code) (in parentheses) and the part number. Column (4) - Usable On Code. When applicable, gives you a code if the item you need is not the same for different models of equipment. These codes are identified below: C O D E U S E D O N V96 M548A1 AP4 M548A3 Column (5) - Unit of Measure (U/M). Indicates the physical measurement or count of the item as issued per the national stock number shown in column (2). Column (6) - Quantity Required (Qty Rqr). Indicates the quantity required. 0081 00-1 Change 1