TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 571 of 640
TM 9-2350-247-10 REMOVE/INSTALL HULL BOTTOM ACCESS COVER AND DRAIN COVER 0076 00 THIS WORK PACKAGE COVERS: Removal (page 0076 00-1). Installation (page 0076 00-4). INITIAL SETUP: M a i n t e n a n c e L e v e l Operator T o o l s a n d S p e c i a l T o o l s Socket Wrench Handle (WP 0082 00, Item 27) Socket Wrench, 9/16 inch (WP 0082 00, Item 38) P e r s o n n e l R e q u i r e d Soldier E q u i p m e n t C o n d i t i o n Engine stopped (WP 0023 00), (WP 0024 00) Carrier blocked (WP 0038 00) REMOVAL WARNING Moving carrier can cause injury or death. Block carrier so it won’t move before removing or installing access cover. WARNING Touching your bare hands or tools to the starter terminals or electrical leads when accessing through the bottom access cover may cause death or serious injury. Do not touch any electrical leads or terminals on the starter because there is 24 volts with over 200 amps connected directly from the batteries. NOTE Hull bottom access covers for M548A1 and M548A3 are different. Both access covers are shown. Do Step 1 for M548A1 hull bottom access covers, then go to Step 3. Do Step 2 for M548A3 hull bottom access cover, then go to Step 3. Drain covers for M548A1 and M548A3 are the same and are removed and installed the same way. 0076 00-1