Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download

Page 558 of 640

TM 9-2350-247-10 MAINTENANCE OF CAB COVER AND WINDOWS — Continued 0072 00 INSTALLATION C A U T I O N Make sure that the escape hatch ring or the plastic rear windows are not damaged, and that the cab cover is dry and free of dirt, mildew, and rot. 1. Unfold the cab cover and guide the rope bead into the groove in the cover mount. Then pull the cover sideways until it’s in position over the cab. 2. Spread the cab cover over the cab frame. Pull the cover tight across the front, so the cloth is smooth along the mount, and snap the sides of the cab cover to the cab frame. 3. Hook the tie down rope to the 12 cleats at the back of the cab. Tighten the rope and tie it in place. ESCAPE HATCH COVER 1. The cab escape hatch cover works exactly the same as the cargo compartment escape hatch cover. See the picture and instructions in WP 0071 00. The cab escape hatch cover has a retainer at the rear that keeps it fastened to the cab cover when you open it. 0072 00-2