TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 538 of 640
TM 9-2350-247-10 CHECK/FILL COOLING SYSTEM (M548A3) — Continued 0066 00 OPERATIONAL CHECK WARNING Hot radiator coolant can burn you. Use hand to remove cap only if cool to touch. Turn cap slowly to release pressure. Replace cap by pressing down and turning cap until tight. C A U T I O N Adding coolant to an overheated engine could damage engine. Do not add coolant to an overheated engine unless engine is running. Local ground water may contain dirt or minerals that can damage the cooling system. Use clean water, preferably distilled water for cooling system replacement water. 1. Remove coolant fill cap. 2. Check coolant level. Coolant should reach bottom of filler neck. Add coolant as needed. After adding coolant, start and idle engine for 5 minutes and check coolant level again. 3. Install coolant fill cap. END OF TASK 0066 00-2