TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 522 of 640
TM 9-2350-247-10 REMOVE/INSTALL T130 TRACK PAD — Continued 0061 00 REPLACE BUMPER MOUNTED TRACK PAD NOTE Install worn track pads on the rear bumper to have spare track pads available and to help protect the carrier and anything you might back into. 1. Remove track pad from bumper by unscrewing nut and taking track pad off. Use socket wrench handle and 15/16 inch socket wrench. 2. Install track pad on rear bumper and tighten nut to secure track pad in place. Use socket wrench handle and 15/16 inch socket wrench. END OF TASK 0061 00-2 Change 1 3. Mark pad and fill out form DA 2404 or DA 5988-E and notify unit maintenance so they can torque nut properly.