TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 521 of 640
TM 9-2350-247-10 REMOVE/INSTALL T130 TRACK PAD 0061 00 THIS WORK PACKAGE COVERS: Removal (page 0061 00-1). Installation (page 0061 00-1). Replace Bumper Mounted Track Pad (page 0061 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Operator T o o l s a n d S p e c i a l T o o l s Hammer, 2 lb (WP 0081 00, Item 24) Socket Wrench Handle (WP 0081 00, Item 27) Socket Wrench, 15/16 inch (WP 0081 00, Item 38) P e r s o n n e l R e q u i r e d Driver E q u i p m e n t C o n d i t i o n Carrier on level surface Engine stopped (WP 0023 00 or WP 0024 00) REMOVAL NOTE The track pad is attached by a built-in stud and one nut. 1. Remove the track pad from the track shoe. Loosen nut and pry pad out of the hole in the shoe. Use socket wrench handle and 15/16 inch socket wrench. C A U T I O N Use care not to damage threads on stud if you expect to use pad again. 2. Loosen stuck track pad by tapping on end of stud. Use hammer. INSTALLATION 1. Install track pad on track shoe. Install nut on stud. 2. Tighten nut using socket wrench handle and 15/16 inch socket wrench. 0061 00-1 Change 1