TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 517 of 640
TM 9-2350-247-10 ASSEMBLE T130 TRACK SHOE SECTIONS OFF VEHICLE 0060 02 THIS WORK PACKAGE COVERS: Assembly (page 0060 02-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Operator T o o l s a n d S p e c i a l T o o l s Crowbar (WP 0081 00, Item 12) Drive Pin Punch (WP 0081 00, Item 32) G rease Gun (WP 008 1 00, Item 22) Hammer, 2 lb (WP 0081 00, Item 24) Industrial Goggles (WP 0082 00) Open End Wrench, Adjustable (WP 0081 00, Item 43) Socket Wrench, 11/16 inch (WP 0081 00, Item 38) Track Fixtures (WP 0081 00, Item 19) Wrench Handle (WP 0081 00, Item 27) P e r s o n n e l R e q u i r e d Driver Helper (H) E q u i p m e n t C o n d i t i o n Track on level surface ASSEMBLY NOTE Track shoe sections may come in 7 or 8 shoes per section. Make sure to count the number of shoes during assembly. For all M548 FOV there are 66 track shoes required for the left side and right side. Inspect each track shoe to see if anything is wrong before it is assembled. 1. Match two sections of track. Have helper assist. 2. Remove nut from track pin. Use 1/2 inch drive socket handle and 11/16 inch socket. 0060 02-1 Change 1