TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 516 of 640
TM 9-2350-247-10 REMOVE/INSTALL T150 TRACK SHOE — Continued 0060 01 INSTALLATION WARNING Loss of track end connector can cause track throw and loss of vehicle control. Soldiers can be killed or injured. Mark end connector bolts. Notify maintenance to torque bolts. NOTE Position track shoes at slight angle to install end connectors on both shoe pins. Proper tightening of end connector bolts keeps them from coming loose. Have unit maintenance properly torque as soon as possible. 1. Install new track shoe on track. a. Install two track pin alignment tools over track shoe pins. Install two track end connectors on track shoes. Remove track pin alignment tools before driving end connectors flush with pin ends. b. Drive end connectors flush with pin ends and install bolts on each end connector. c. Tighten bolts using extension wrench on handle with socket. 2. Mark track that was replaced so bolts can be torqued later. 3. Join track (WP 0059 01). 4. Stow spare track shoe. 5. Notify unit maintenance to torque bolts. Fill out form DA 2404 or DA 5988–E and notify unit maintenance. END OF TASK 0060 01-2 Change 1