TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 513 of 640
TM 9-2350-247-10 REMOVE/INSTALL T130 TRACK SHOE — Continued 0060 00 C A U T I O N Do not use any oil or grease on track pin. Oil or grease will destroy the rubber bushings in the track shoes over time. The track pins have a protective coating that does not need to be removed. 6. Install nut flush on track pin. Use socket wrench handle and 11/16 inch socket wrench. 7. Install replacement track shoe in lower part of track. Align track pin holes. WARNING Hammering on drive pin punch or track pin may deflect particles of metal or dirt in soldier’s eyes. To prevent eye damage, protection (goggles) is necessary. 8. Obtain 20-degree angle between track shoes to be connected. WARNING Track shoe bushing failure can cause track assembly failure and loss of vehicle control. Soldiers can be killed or injured. Do not use excessive force that could damage the track shoe bushing while driving in the track pin during assembly. 0060 00-5 Change 1