TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 508 of 640
TM 9-2350-247-10 BREAK/JOIN T150 TRACK — Continued 0059 01 WARNING Not getting the bolt tight enough may result in death to personnel and damage to equipment if the end connectors fall off during movement of the vehicle. Use the wrench extension over the breaker bar to achieve more leverage when tightening the end connector bolt. NOTE Move vehicle far enough to position end connectors that need to be tightened on top. NOTE Mark the location of the end connectors so unit maintenance can torque them properly. Take the vehicle to unit maintenance as soon as possible to have the end connector bolts torqued to the proper value. 9. Secure both end connector bolts using the 3/4 inch drive handle wrench and handle extension to get enough torque until you can get it to unit maintenance to torque it properly. Mark the end connectors you have loosened and retightened so unit maintenance can tighten to the right torque value. Fill out form DA 2404 or DA 5988-E and notify unit maintenance. 10. Adjust track tension (WP 0058 01). END OF TASK 0059 01-10 Change 1