TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 496 of 640
TM 9-2350-247-10 BREAK/JOIN T130 TRACK — Continued 0059 00 5. From inside of track, install track pin in track pin hole. As helper aligns track pin holes with crowbar, lightly tap in track pin. Drive track pin all the way through track. Use hammer. 6. Install a nut on the other end of the track pin. Tighten both nuts until 2 or 3 threads show between the nuts and the ends of the pin or about 1/8 inch (0.3 cm). Use socket wrench handle and 11/16 inch socket wrench. 7. Mark nut so unit maintenance can torque it properly. Fill out form DA 2404 or DA 5988-E and notify unit maintenance. 8. Remove two track fixtures. Use adjustable wrench. 9. Adjust track tension (WP 0058 00). 0059 00-8 Change 1