TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 483 of 640
TM 9-2350-247-10 INSPECT/ADJUST T130 TRACK TENSION — Continued 0058 00 11. Check track tension by using profile gauge. Position gauge lightly against bottom of track at centerline of second road wheel. Look through hole in gauge. If top of second road wheel can be seen (3/8 to 5/8 inch (1 to 1.6 cm)) and track touches number three road wheel, track tension is correct. 12. If top of second road wheel can’t be seen or track does not touch third road wheel, track needs adjusting. To tighten track tension, do ADJUSTMENT Step 1. To loosen track tension, do ADJUSTMENT Step 2. ADJUSTMENT C A U T I O N Dirt can damage fitting and cylinder. Clean all dirt from fitting on track tension adjuster. Servicing the fitting can damage the track adjuster, idler wheel, and final drive bearings. Track adjuster fitting is not a true lubrication point. DO NOT service when lubricating the carrier. Track adjuster can be damaged during carrier operation. Do not extend adjuster beyond 17 inches (43 cm). 0058 00-5 Change 1