TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 482 of 640
TM 9-2350-247-10 INSPECT/ADJUST T130 TRACK TENSION — Continued 0058 00 NOTE Either drive pin punch or profile gauge may be used to check track tension. If using drive pin punch, do Steps 9 - 10. If using profile gauge, do Steps 11 - 12. 9. Check track tension by using drive pin punch. Insert drive pin punch between top of number two road wheel and bottom of track. If drive pin punch can be inserted freely and track touches top of number three road wheel, track tension is correct. 10. If drive pin punch cannot be inserted freely, track tension is too loose. To tighten track tension, do ADJUSTMENT Step 1. If drive pin punch can be inserted freely, but track does not touch top of number three road wheel, track tension is too tight. To loosen track tension, do ADJUSTMENT Step 2. 0058 00-4 Change 1