TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 220 of 640
TM 9-2350-247-10 OPERATE WINCH (M548A1) — Continued 0030 00 3. Pull out the clutch handle lock and move the drum clutch handle to disengaged position. NOTE As you operate the winch, check for grabbing or excessive play in the drum lock and clutch handle. If you notice anything wrong, report the problem to unit maintenance. Always leave at least four turns of wire rope on the winch drum. 4. Pull out the wire rope by hand. 5. Secure the wire rope to a suitable anchor point. A snatch block and utility chain are stowed under the water can in the cab. You can use them to help secure the rope to the anchor point. Pick an anchor point as nearly straight in front of the carrier as you can so the rope will wind on the drum smoothly. 0030 00-2