TM-9-2350-247-10 Operator Manual M548A1 M548A3 Tracked Cargo Carrier Download
Page 198 of 640
TM 9-2350-247-10 STOP ENGINE (M548A1) — Continued 0023 00 2. Place the transmission range selector in N position. 3. Set the engine to run at about 1,000 rpm for 2 minutes or so. 4. Set the engine back to idle (650–700 rpm) and check the instrument panel for normal readings. 5. Pull the fuel cut-off all the way out. The engine will stop when it has burned all the fuel in its injectors and feed lines. (This should only take a few seconds.) C A U T I O N Always shut the engine off before you turn the MASTER SWITCH OFF. If you turn the MASTER SWITCH OFF with the engine running, you may damage the generator or regulator. 6. Turn off the lights, radio, and any other electrical equipment that’s on. If you have a vehicle compartment heater kit that’s been running, wait for the heater to complete its cool-down and stop itself after you turn it off. The light will go off when the heater blower stops. 0023 00-2