TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download
Page 93 of 176
TM 9-1240-216-34 4-9. ELEVATION LOCK ASSEMBLY REMOVAL TOOLS: 1/4" flat tip screwdriver #2 Phillips PERSONNEL: One EQUIPMENT CONDITION: Body assembly on work bench; power disconnected FRAME 1 Step 1. 2. 3. 4. 5. Procedure Using screwdriver, remove three screws (1) and three washers (2) from body assembly (3). Turn lever (4) counterclockwise to loosen segment (5). Do steps 3 and 4 for M24 configurations only. NOTE Move segment (5) to line up notch on segment (5) with screw (6). Using screwdriver, remove screw (6) from body assembly (3) while lifting on lock assembly (7). Screw (6) will remain in lock assembly (7). Remove lock assembly (7) from body assembly (3). END OF TASK Para 4-9 Vol II 4-9