Sign up to sell your inventory with NSN Lookup

TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download

Page 89 of 176

TM 9-1240-216-34 4-6. HEADREST ASSEMBLY ASSEMBLY TOOLS: 3/8" flat tip screwdriver #2 cross tip screwdriver (Phillips type) 4 oz. ball peen hammer PERSONNEL: One EQUIPMENT CONDITION: Headrest assembly on work bench FRAME 1 Step 1. 2. 3. 4. 5. 6. Procedure Place two bracket assemblies (1) in position on headrest frame (2). Using flat tip screwdriver, put two special screws (3) onto headrest frame (2). Put two wing knobs (4) on special screw (3). Line up in holes. Using hammer, drive spring pins (5) into hole of wing knobs (4). Hold headrest (6) in position on headrest frame (2). Using Phillips screwdriver, install headrest (6) on headrest frame (2) with two lockwashers (7) and two screws (8). END OF TASK Para 4-6 4-5 Vol II