TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download
Page 87 of 176
TM 9-1240-216-34 4-5. HEADREST ASSEMBLY DISASSEMBLY TOOLS: 3/8" flat tip screwdriver #2 cross tip screwdriver (Phillips type) 4 oz. ball peen hammer 1/16" drive pin punch PERSONNEL: One EQUIPMENT CONDITION: Headrest assembly on work bench Step 1. 2. 3. 4. 5. 6. FRAME 1 Procedure Using hammer and drive pin punch, drive out two spring pins (1) which lock wing knobs (2) to two special screws (3). Using flat tip screwdriver, remove two special screws (3) while holding wing knobs (2). Using hammer and drive pin punch, drive two special screws (3) from wing knobs (2). Remove bracket assemblies (4) from headrest frame (5). Using Phillips screwdriver, remove two screws (6) and two lockwashers (7) from headrest (8). Remove headrest (8) from headrest frame (5). END OF TASK Para 4-5 Vol II 4-3/(4-4 blank)