TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download
Page 77 of 176
TM 9-1240-216-34 3-2. BODY ASSEMBLY INSPECTION UPON RECEIPT (CONT) FRAME 5 Step 1. 2. 3. Procedure Using 1/4" screwdriver, that eight screws (1) (four on each side) holding headrest assembly (2) to body assembly (3) are tight. Turn locking lever (4) counterclockwise and check for binding. Check for one washer (5) between locking lever (4) segment (6) and two washers (7) between locking lever (4) and lock nut (8). GO TO FRAME 6 Maintenance Action Tighten. Replace if missing or damaged. Repair or replace if damaged. Replace if damaged or missing. Reference Para 4-3 Para 4-8 Para 4-8 Para 3-2 Cont Vol II 3-7