Covering the politics, Business and technology of defense - Subscribe Today

TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download

Page 73 of 176

TM 9-1240-216-34 3-2. BODY ASSEMBLY INSPECTION UPON RECEIPT (CONT) NOTE For M24 old and new configurations, do steps 3 and 4 only. FRAME 2 Step 1. 2. 3. 4. 5. Procedure Check two eyepieces (1) for cracks or scratches. Look in eyepieces and check for dirt or moisture inside. Check that identification plate (2) can be read. Using 1/4" screwdriver, check that two studs (3) are tight. Using 1/16" pin open face spanner wrench, check that plug (4) is tight. Using 3/16" screwdriver, check that two identification plate screws (5) are tight. GO TO FRAME 3 Maintenance Action Tell your supervisor. If missing or cannot be read, tell your supervisor. Tighten. If damaged or missing, send body assembly to depot for repair. Tighten. If damaged or missing, send body assembly to depot for repair. Tighten. Replace if damaged or missing. Reference . . . . . . . . . . . . . . . Para 3-2 Cont Vol II 3-3