TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download
Page 144 of 176
TM 9-1240-216-34 4-32. RESISTOR ASSEMBLY REMOVAL (CONT) FRAME 2 Step 1. 2. 3. 4. 5. Procedure Using screwdriver, remove screw (1) and washer (2) which hold white wire (3) of resistor (4) to terminal board (5). (4) to terminal board (5). Using screwdriver, remove screw (6) and washer (7) which hold red wire (8) of resistor WARNING Dry cleaning solvent can catch on fire. Keep it and all materials that can catch on fire away from flames. Use only in a room with a lot of fresh air. Clean sealing compound from hole (9) in body assembly (10) where bushing was installed. Using long nose pliers, remove nut (11) and lockwasher (12) which hold resistor (4) to body assembly (10). Lift resistor (4) out of body assembly (10). END OF TASK Para 4-32 Cont 4-60 Vol II