TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download
Page 142 of 176
TM 9-1240-216-34 Section 10. RESISTOR ASSEMBLY 4-31. RESISTOR ASSEMBLY MAINTENANCE PROCEDURES INDEX Task Reference (para) Removal 4-29 Installation 4-30 4-32. RESISTOR ASSEMBLY REMOVAL APPLICABLE CONFIGURATIONS: M19 and M24 old configurations TOOLS: 1/2" open end wrench 6" long nose pliers 3/16" flat tip screwdriver 6" slip joint pliers 1/16" socket head screw key (Allen wrench or equivalent) SUPPLIES: Solvent (item 9, App A) PERSONNEL: One EQUIPMENT CONDITION: Body assembly on work bench; power disconnected PRELIMINARY PROCEDURES: Remove cover (para 4-14) Remove cable (para 4-20) Remove electron tube (para 4-29) NOTE This procedure is for removal of either resistor. FRAME 1 Step Procedure 1. 2. 3. 4. Remove cap (1) and washer (2) from bushing (3). Using screwdriver, remove screw (4) and lockwasher (5) which hold chain of cap (1) to body assembly (6). Using open end wrench, remove nut (7) from busting (3). Using Allen wrench, remove setscrew (8) from bushing (3). Para 4-31 4-58 Vol II