TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download

Page 112 of 176

TM 9-1240-216-34 4-17. BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY REMOVAL (CONT) NOTE Do frame 3 for M19 and M24 new configurations only. NOTE This procedure is for either the left-hand or right-hand board assembly, but only the right-hand side has ground wire. FRAME 3 Step Procedure 1. Using screwdriver, remove screw (1) and lockwasher (2). 2. Using screwdriver, remove screw (3), lockwasher (4), ground wire (5), and spacer. 3. Lift terminal board housing (7) and slide off from terminal board (8). 4. Tag each wire attached to terminal board (8) (JPG). 5. Using screwdriver, remove screw (9), washer (10 ), and ground wire (5). 6. Using screwdriver, remove screw (11), washer (12), and wires (13) and (14). 7. Remove terminal board (8). END OF TASK Para 4-17 Cont 4-28 Vol II