TM-9-1240-216-34 Maintenance Manual M19 and M24 Persicope Download
Page 108 of 176
TM 9-1240-216-34 Section 5. BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY 4-16. BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY MAINTENANCE PROCEDURES INDEX Task Reference (para) Removal 4-17 Installation 4-18 4-17. BOARD ASSEMBLY AND GROUND WIRE ASSEMBLY REMOVAL TOOLS: 3/ 16“ flat tip screwdriver PERSONNEL: One REFERENCES: JPG 41C for tagging wires EQUIPMENT CONDITION: Body assembly on work bench; power disconnected PRELIMINARY PROCEDURES: Remove cover (para 4-14) NOTE Frames 1 and 2 are for M19 and M24 old configurations. Frame 3 is for M19 and M24 new configurations. NOTE This procedure is for either board assembly. FRAME 1 Step Procedure 1. Using screwdriver, remove two screws (1) and two lockwashers (2) which hold terminal housing (3) to body assembly (4). 2. Remove spacer (5). 3. Slide terminal housing (3) off of board assembly (6). GO TO FRAME 2 Para 4-16 4-24 Vol II