TM-55-2350-224-14 Transportation Guidance for M113 Family of Vehicles Download
Page 38 of 58
To develop full cable loop working strength, cable clamp nuts must be torqued to at least: 65 ft-lb on 1/2-in. clamp nuts. 95 ft-lb on 5/8-in. clamp nuts. To ensure proper torque, apply torque in stages to both nuts alternately. TM 55-2350-224-14 Use a staggered nailing pattern when lumber or laminated lumber is nailed to the floor of a railcar. Adjust the nail pattern so that a nail going through a piece of lumber on the top of the stack is not driven into or against a nail in a lower piece of lumber. 3-7