TB-9-2350-376-23-1 Compartment Heater Exhaust Cable Guide Bracket Download
Page 12 of 28
TB 9-2350-376-23-1 INSTALLATION PROCEDURES 0003 00 2. Install Cable Guide Bracket a. Position the V-bend (1) of the cable guide bracket (5) into the opening (11) of the traverse beam (12). b. Position cables and harnesses (10) in front of cable guide bracket (5) and away from compartment heater exhaust. NOTE Make sure lockwasher (3) is installed between weldnut (2) and compartment heater ground wire (4). Make sure lockwasher (8) is installed between clamp (6) and screw (7). NOTE When installing new clamp (6), make sure clamp NAS1713D26N from modification kit is used on M577A3 and M1068A3. For M577A2 and M1068, use clamp NAS1713D22N. c. Install new lockwasher (internal/external teeth) (3), compartment heater ground wire (4), cable guide bracket (5), new clamp (6) with harnesses (10), new lockwasher (internal teeth) (8), and screw (7) on overhead weldnut (2). d. Install two new straps (9) on cables and harnesses (10). END OF WORK PACKAGE 0003 00-2