TB-9-2350-368-25 Powerplant Test Stand M113A2 M113A3 M548A1 M548A3 Download

Page 96 of 120

TB 9-2350-368-25 4-24 WARNING Moving powerplant parts could injure you or foreign objects will damage the flywheel or engine. Stay clear of moving parts when powerplant is running. Noise from powerplant could damage hearing. Use double ear protection when powerplant is operated. CAUTION Starter can be damaged. Do not hold start switch in start position for more than 15 seconds at a time NOTE If engine does not start on first try, wait one minute and try again. If engine does not start after three tries, troubleshoot engine. Refer to TM 9-2350-261-20. 31. Push start switch (instrument panel/box) until engine starts, but no longer than 15 seconds. 32. Check that transmission oil pressure light and engine low pressure light go off. WARNING Hot oil, water, and engine parts can burn you. Let powerplant cool before you start work. 33. Follow procedures for operating the engine. Run the engine for 10 minutes and check for leaks. Check all fluid levels and fill as necessary. 34. Make any adjustments or repairs to engine as required. Refer to the appropriate technical manual. TM 9-2815-205-34 covers all M113 FOV. 35. Troubleshoot/test engine, refer to TM 9-2350-261-20-1, TM 9-2350-247-20-1, TM 9-2350-277-20-1, or TM 9-2815-205-34. SHUTOFF 36. Move fuel pump switch to off position and pull stop lever to stop position (see Figure 4-8). 37. Turn master switch to off position. REMOVE WARNING Hot oil, water, and engine parts can burn you. Let powerplant cool before you start work. 38. Remove turbocharger protective shield from engine blower inlet. Cover engine blower inlet with tape or cardboard and tape to keep out debris when storing (TM 38-260) the engine or for transporting it.