TB-9-2350-368-25 Powerplant Test Stand M113A2 M113A3 M548A1 M548A3 Download
Page 86 of 120
TB 9-2350-368-25 4-14 TESTING M113A2/M548A1 POWERPLANT DESCRIPTION This task covers: Install (page 4-14). Start (page 4-18). Stop (page 4-18). Remove (page 4-19). INITIAL SETUP Tools: General Mechanic's Tool Kit Powerplant Sling Turbocharger Inlet Shield 4910-01-127-7959 Materials/Parts: Grease Locknuts (2) Personnel Required: Unit Mechanic Helper References: TM 9-2350-247-20-1 TM 9-2350-261-20-1 TM 9-2520-254-34 TM 9-2815-205-34 TM 9-4910-571-12&P TM 38-260 Equipment Conditions: Powerplant on Blocks Powerplant Test Stand blocked INSTALL WARNING • Damaged lifting slings can fail with load. Personnel can be killed or injured. Inspect all slings before use. Do not use damaged slings. • Hanging loads can kill or injure you. Keep away from hanging loads and overhead equipment. Keep hands out of area while powerplant is being lifted for removal or lowered for installation. 1. Attach powerplant sling to lifting device of at least 3,000 pounds (1,362 kg) capacity. 2. Attach powerplant sling to lifting brackets and lift powerplant assembly from blocks. Have helper assist.