TB-9-2350-368-25 Powerplant Test Stand M113A2 M113A3 M548A1 M548A3 Download
Page 81 of 120
TB 9-2350-368-25 4-9 17. Install right brake connecting links, two screws, lockwashers, and flat washers on right transmission brake. See Figure 4-6. CAUTION Do not use screws removed from transmission. Damage of screws may damage transmission. 18. Remove two screws from the right side of transmission. Save transmission screws. Install brake stall test tool (Figure 2-28), secure with two screws. Connect brake stall test tool to braking hardware. Use rod-end clevis and rod-end connector. Connect rigid connecting link between two 1/4 inch steel plates and secure with headed pin, washer, and cotter pin. See Figure 4-6. 19. Fill engine and transmission with oil. Refer to LO 9-2350-277-12 (M113A3 FOV) or LO 9-2350-247-12 (M548A3). Figure 4-6. Hook-Up List (M113A3/M548A3)