TB-9-2350-368-25 Powerplant Test Stand M113A2 M113A3 M548A1 M548A3 Download
Page 63 of 120
TB 9-2350-368-25 2-49 SECTION VIII. HYDRAULIC SYSTEM 2-8. HYDRAULIC SYSTEM. Part and components for the hydraulic system can be fabricated or purchased from stock. a. Hydraulic Loop (M113A2/M548A1) Bill Of Materials Item Nomenclature Part Number NSN Qty 1 Coupling half quick disconnect 10865913 4730-00-800-2828 2 2 Nipple pipe Bench stock 1 NOTE Only the nose piece of the coupling half quick disconnect assembly (1) is needed. 1. Thread nipple pipe (2) to match the threads of two nose pieces (1). 2. Connect nipple pipe (2) between two nose pieces (1). See Figure 2-29. Figure 2-29. Hydraulic System Loop Fabrication SECTION IX. MISCELLANEOUS 2-9. MISCELLANEOUS. This section tells you how to make several brackets. Some are very simple and need no instructions. These will be left up to the maker as to what design and size are needed (if needed at all). Bill Of Materials Item Nomenclature Part Number NSN Qty 1 Bracket, mild steel Bench stock A/R a. NATO Slave Receptacle Bracket 1. Fabricate NATO slave receptacle bracket from 1/8-inch mild steel stock. 2. Weld NATO slave receptacle bracket to powerplant frame, located at left rear corner.