TB-9-2350-368-25 Powerplant Test Stand M113A2 M113A3 M548A1 M548A3 Download
Page 24 of 120
TB 9-2350-368-25 2-10 d. Transfer Gearcase Mount (M113A2/M548A1) Bill Of Materials Item Nomenclature Part Number NSN Qty 3/8” Steel Plate 1 4 by 26-3/4 inches (10.2 by 68.0 cm) 1 1/4” Steel Plate 2 3 by 1-1/4 inches (7.6 by 3.2 cm) 1 3” by 1-1/4” by 1/4” Steel Channel 3 6-3/4 inches (17.2 cm) 2 4 4-3/4 inches (12.1 cm) 1 Hardware 5 Screw B1821BH056C550N 2 6 Washer MS27183-17 2 7 Nut MS51967-13 2 8 Screw B1821BH100C600N 1 9 Washer MS27183-27 1 10 Nut MS51967-29 1 11 Screw B1821BH063C300N 1 12 Washer MS27183-21 1 13 Nut MS51967-20 1 1. Locate and drill two 1/2-inch (12.7 mm) holes in steel plate (1). See Figure 2-8. 2. Locate and drill a 1/2-inch (12.7 mm) hole in plate (2). Chamfer two corners (3). See Figure 2-8. 3. Locate and drill a 1-inch (2.5 cm) hole in each 6-3/4 inch (17.2 cm) channel (3). See Figure 2-8. 4. Weld plate (2) to steel channel (4). See Figure 2-7. Locate channel (4) and weld to plate (1). See Figure 2- 8. 5. Center two steel channels (3) and weld to plate (1). See Figure 2-8.